Following on the heels of my post about kids, trees and entrepreneurship, I'd like to share our story of how we developed chess pieces specifically for Crazyhouse chess. My sister's husband, Matt and I share both a common first name and more pertinently, an interest in Chess. I did need to add that, as our discussions together were instrumental in bringing this about, and it would be rather strange to read a post written in both 1st and 3rd person.
While I've enjoyed chess, having read a book or two and played some, I am not very tutored. On the other hand, Matt, my brother-in-law, has really been excited about chess and its variants for some time, in recent years being especially involved with Crazyhouse Chess. He has enjoyed subscribing to some of the most common blogs and has played a lot with friends from work and enjoys teaching the game to his family and anyone else he knows. In the last year or two I've built him a couple of chess boards as small side jobs, which I can say was great. The two boards shown below were both made for him and led to developing the chess pieces we now make.
This board was made with a mahogany frame, dark walnut squares and lighter cherry squares. I added zebra wood inlay with ipe wood outlining to add interest.
This striking board was made of East Indian Rosewood and Maple with a mahogany border stripe and is solid through the thickness, so the back side of the board is essentially the same as the front making the board usable on both faces. It is about 3/4" thick and fairly light weight considering the density of the wood used. Each piece is sequenced so that the grain runs from one square into the next of the same color with grain lines running the length of each run. I was really pleased with the way it turned out. Anyway, while boards can be fun, I'm mainly focusing on the chess sets because there are so many manufacturers out there that make nice boards at great prices. But, if people want a board to match their set, I can make them to match as a nice perk.
Then, after he had a board, Matt said what he really needed now was a chess set to go with them, but there was a catch; he needed a set specifically for Crazyhouse. I learned about some of the difficulties of playing Crazyhouse with tangible pieces. Matt had seen where people had made their own pieces but naturally wanted a quality product as attractive as the boards we'd made. We came to the conclusion that pieces needed to be standardized, sufficiently thick to handle easily and manufactured so anyone can get a set.
With those goals in mind I started looking for ways to accomplish this. After months of looking and more thinking, we purchased a laser cutter and began working in earnest and this exciting development has grown out of those efforts. Our laser cutter has now enabled us to make pieces to precise sizes and to reproduce them quickly enough to supply the needs of Crazyhouse players who want a more tangible experience. We created all of our own images based on interpretations of modern icons, so the artwork is unique and doesn't infringe on any person's unique work. The icons we use have been optimized for speed and quality, though we've added some fun details. We now have 3 categories of pieces that are of varying complexity and price.
The first category shown above is the "Classic." "Classic", meaning our baseline offering, is a simple option for those who just want to play the game. These pieces are a new style, implementing modern technology to differentiate it from the Staunton or otherwise named styles of pieces which are generally made by the process of turning on a lathe. These are subdivided into Standard Sets, 2-Sided Sets and Bughouse sets. The 2-Sided Sets are specifically for Crazyhouse players and are the focus here. For "Classic" sets, the color of light pieces are the same for all options, the dark pieces are stained a dark brown or stained Ebony for an additional charge. We found that with laser engraving, black on black is hard to see, so we fill the engraving on ebony stained pieces with a white filler, so it is visible. All pieces are seal coated for durability.
Note: Standard sets are used for standard chess and Bughouse sets are two standard sets for side-by-side games. Check out rules for playing the Bughouse variation found elsewhere, online. The back of each token matches its front.
Now, for Crazyhouse:
Each 2-Sided piece used for Crazyhouse chess is a flat token cut from a quality birch plywood having the icon for each piece engraved on its surface. As we make pieces, we glue together 2 layers of plywood to a thickness that lends itself to easy movement, thin pieces being awkward to pick up. Gluing layers together also allows us to independently create and apply a dark piece to the back of the light so that the pieces are reversible. Thus, in capturing a piece, it may be easily flipped and kept in one's "pocket" until ready to be "dropped" onto the board during play.
This feature eliminates having a second set of pieces and saves time when seconds matter. Pawn promotion toppers, a queen and a knight, enable players to quickly and easily promote pawns with a single layer token that rests on top of the pawn below it and affords Crazyhouse players with the most versatile range of motions needed to counter an attack or make of their own. If captured, the topper is easily removed and the base pawn is placed in the pocket.
As a side note: we do offer single sided sets that even those engaged in the original style of chess could appreciate, though token shaped pieces in a market full of carved sets may be merely a curiosity. Who knows, maybe slim tokens in a flat box may be more convenient than thick carved pieces. Slim is good, right?
The next category is the Premium Set. This set is made with a plywood core and also engraved, but is "premium" because it is layered with a quality veneer product that gives each piece its own natural beauty. There is a selection of premium domestic woods and a couple exotic woods available upon request. My brother-in-law, Matt, has requested I make him a set to match the rosewood board above and I'm now in the process of making that set.
The final category is the Executive Set. These feature dark pieces on a light background and light pieces on a dark background. The intricate pieces of veneer are "inlaid" to create a flat, smooth surface with each alternating portion of veneer fitting closely within the other. We cut these veneer "stickers" from fine hardwood veneer that has been prepared with pressure sensitive adhesive - psa backing. This is a fantastic product and has a host of uses. These pieces are painstakingly fitted and pressed together for a refined appearance and are the luxury set we make for customers who want the best. All pieces are then seal coated for durability.
We want to offer options because people love choosing and want the things they get to reflect what they appreciate. Henry Ford's philosophy that ‘Any customer can have a car painted any colour that he wants so long as it is black’ isn't going to fly nowadays, but then again, he wasn't making airplanes, or chess pieces. I'm hoping that you can find something you like among the choices we offer and give us suggestions if nothing quite speaks to you. Through this contribution, we want to see the Crazyhouse community grow and enjoy their exciting place as an independent advancement to a fantastic and historic game.
Customize your Pieces Here!
Matthew is a talented young woodworker that enjoys unlocking the natural beauty of each piece of wood. He had an early start to his woodworking pursuits in junior high classes and has in the last 7 years, begun to combine his design training and experience with some talents that remained dormant for a number of years. He loves exploring techniques and the best that is out there and in so doing, he has created many custom pieces for family and friends and begun marketing his work for the enjoyment of those who appreciate hand-crafted, unique and inspiring work.